P0109
Torque Control Low Signal
Powertrain · Powertrain
high
What does this code mean?
The control module is receiving a signal that is too low for normal operation.
This is a generic OBD-II / UDS code — the meaning is standardized across manufacturers.
Possible symptoms
Erratic operation
Reduced function
Warning light
Possible causes
- 1.Weak sensor signal
- 2.Poor connection
- 3.Failed module
- 4.Low supply voltage
These are possible causes — a professional inspection is required to confirm.
Diagnostic procedure & recommended checks
- Measure the signal voltage
- Clean the connector
- Test the module supply
Recommended actions
- Repair the signal path
- Replace the failed module
Can I drive?
Yes, in limp mode
When to contact a professional
Leave to a specialist if the car enters limp mode or drive power becomes unstable.
Related Fix & Solve guides
Diagnostic information is provided for informational purposes and does not replace professional inspection. High-voltage systems must only be serviced by qualified personnel.